SDX6811N-A4/SDX6812N-A4

Download Brochure

Download User Manual 

---

Unbalanced/Balanced AES and Analog Audio De-embedding Module

The SDX6811N-A4/SDX6812N-A4 is an AES/EBU de-embedding module, which de-embeds 4 channels (2 pairs) of AES/EBU audio and supports SDI output with equalization and reclocking. The user can choose any channel out of 4 embedded audio groups as an audio output or the user can choose the synthesized audio as an output signal.

---

Features  >>> 

• De-embedding audio from SD-SDI signal
• 2 pairs (4 channels)of AES/EBU outputs
• De-embedding in 525/625 video standard
• SDI output with equalization and reclocking
• One channel analog composite output monitoring
• 27 available signal sources for each audio output
• SD-SDI video input auto-detect and input status feedback
  

• 16-bit, 20-bit and 24-bit audio processing
• 4-channel audio metering display
• Generating Tone signal at fixed frequency rate
• Maximum 1.3 seconds audio delay, invert and mute
• EDH Monitoring
• Freeze frame, black field and video loss detection
• Audio loss and audio overload monitoring

---

Specifications  >>> 

 SDI Video Input​
Signal: SMPTE259M-C, 270 Mbps, 525/625 component
Connector: BNC (IEC169-8)
Impedance: 75 ohm
Return Loss: >18 dB to 270 MHz
Equalization: Auto equalizing to 30dB@270 Mbps​

SDI Video Output 
Signal: SMPTE259M-C, 270 Mbps, 525/625 component
Connector: BNC (IEC169-8)
Impedance: 75 ohm
Return Loss: >18 dB to 270 MHz
Signal Level: 800 mV +/-10%
DC Offset: 0 V ± 0.5
Rise and Fall Time: 400-1500 ps (20% to 80% of amplitude)
Overshoot: <10% of amplitude

Unbalanced AES Output (applicable to SDX6811N-A4 only)
Connector: BNC(IEC 169-8)
Output Level: 1.0 V +/-10% (peak to peak)
DC Offset: 0.0V±50.0mV
Rise and Fall Time: 30 to 44 ns (10% to 90% of amplitude)
Impedance: 75 ohm
Return Loss: >25 dB, 0.1 to 6.0 MHz
​
Balanced AES Output (applicable to SDX6812N-A4 only)
Connector: 3-pin connector (male)
Output Level: 2.0 to 7.0 V (peak to peak)
Jitter: +/-20 ns
Rise and Fall Time: 5 to 30 ns (10% to 90%)
Impedance: 110 ohm +/- 20% (0.1 to 6 MHz)
CMR Ratio: >30 dB below output signal (0 to 6 MHz)​

Analog Composite Video Output
Standard: NTSC, PAL or PAL-M
Level: 1Vp-p +/-3dB
Impedance: 75 ohm
Return Loss: >40 dB to 5 MHz
DC Offset: 0V±0.05 V
Frequency Response: ±0.2 dB to 5 MHz
IDifferential Gain: <1%
Differential Phase: <1.5°
Group Delay: +/-10ns to 5 MHZ

Analog Audio Output
Connector: 3-pin
Impedance: 66 ohm
THD+N: 0.004% @ 1 kHz 0 dBFS
S/N Ratio: >107dB
Return Loss: >25dB, 0.1 to 6MHz
Frequency Response: 20 Hz - 20 kHz: 0 ±0.15 dB​

DARS Input
Connector: 3-pin connector
Sensitivity: <200mv
Impedance: 110 ohm +/- 20% (0.1 to 6 MHz)
Maximum Input Level: 10V(peak to peak)
CMR Ratio: >30 dB below output signal (0 to 6 MHz)​

Unbalanced DARS Input
Connector: BNC(IEC 169-8)
Sensitivity: <200mv
Impedance: 75 ohm
Return Loss: >35 dB, 0.1 to 6.0 MHz
​
Power Consumption
Power: 3.25W
Positive Rail: 500 mA
Negative Rail: 10 mA

*Specifications are subject to change without notice

---

Ordering Information>>>  

SDX6811N-A4
AES and analog audio de-embedding module, two pairs unbalanced AES outputs

SDX6812N-A4
AES and analog audio de-embedding module, two pairs balanced AES outputs