SMX6810N(S)-B2/SMX6810N(S)-U2
Analog Audio Embedding Modules with AES Output
The SMX6810N(S)-B2/SMX6810N(S)-U2 is an analog audio embedding module with AES outputs. Both modules support 4ch analog audio embedding and have embedded SD-SDI outputs with reclocking. The user can choose either from input audio or other audio synthesized by system and embed them into any audio group.
Each module has its distinct feature as follows:
The SMX6810N-B2 has 2 pairs of balanced AES outputs;
The SMX6810NS-B2 has 2 pairs of balanced AES outputs and audio tracking;
The SMX6810N-U2 has 2 pairs of unbalanced AES outputs;
The SMX6810NS-U2 has 2 pairs of unbalanced AES outputs and audio tracking;
Each module has its distinct feature as follows:
The SMX6810N-B2 has 2 pairs of balanced AES outputs;
The SMX6810NS-B2 has 2 pairs of balanced AES outputs and audio tracking;
The SMX6810N-U2 has 2 pairs of unbalanced AES outputs;
The SMX6810NS-U2 has 2 pairs of unbalanced AES outputs and audio tracking;
Features >>>
|
|
Specifications >>>
SDI Video Input
Signal Standard: SMPTE 259M,270 Mbps,525/625 component Impedance: 75 ohm Return Loss: >18dB to 360MHz Connector: BNC (IEC169-8) Equalization: Automatic equalizing to 30dB@270 Mbps SDI Video Output Signal Standard: SMPTE 259M-C,270 Mbps,525/625 component Connector: BNC (IEC169-8) Impedance: 75 ohm Return Loss: >18dB to 270MHz Signal Level: 800 mV ± 10% DC Offset: 0 V ± 0.5 V Rise and Fall Time: 400 to 1500ps,20% to 80% of amplitude Overshoot: <10% of amplitude Jitter: <0.2 UI(740ps)peak, typical<500ps Analog Composite Video Output Signal Standard: NTSC, PAL or PAL-M Level: 1Vp-p +/-3dB Impedance: 75 ohm Return Loss: >40 dB to 5 MHz DC Offset: 0V±0.05 V Frequency Response: ±0.2 dB to 5 MHz Differential Gain: <1% Differential Phase: <1.5° Group delay: +/-10ns to 5 MHZ Unbalanced AES Outputs (applicable to SMX6810N(S)-U2 Connector: BNC(IEC 169-8) Output Level: 1.0 V +/-10% (peak to peak) DC offset: 0.0V±50.0mV Rise and Fall Time: 30 to 44 ns (10% to 90% of amplitude) Impedance: 75 ohm Return Loss: >25 dB, 0.1 to 6.0 MHz Analog Audio Input Connector: 3-pin Analog Input Level: 28-16dBu Frequency Response: +/-0.05dB (20-20KHz) THD+N: -95dB, 20-20KHz@-3dBFS Crosstalk: -95dB(20-20KHz) |
Analog Audio Input
Connector: 3-pin Analog Input Level: 28-16dBu Impedance: >30Kohm Frequency Response: +/-0.05dB (20-20KHz) THD+N: 95dB, 20-20KHz@-3dBFS Crosstalk: -95dB(20-20KHz) Balanced AES Outputs (applicable to SMX6810N(S)-B2 Connector: 3-pin (male) Output Level: 2.0 to 7.0 V (peak to peak) Jitter: +/-20 ns Rise and Fall Time: 5 to 30 ns (10% to 90%) Impedance: 110 ohm +/- 20% (0.1 to 6 MHz) CMR Ratio: >30 dB below output signal (0 to 6 MHz) DARS Input Connector: 3-pin (male) Sensitivity: < 200mv Impedance: 110 ohm +/- 20% (0.1 to 6 MHz) Maximum Input Level: 10V,peak to peak CMR Ratio: >30 dB below output signal (0 to 6 MHz) Unbalanced DARS Input Connector: BNC,IEC 169-8 Sensitivity: < 200mv Impedance: 75 ohm Return Loss: >35 dB, 0.1 to 6.0 MHz DATAIN Input Impedance: 75ohm/high impedance (jumper selectable) Input Sensitivity: 500mV pk to pk(minimum) Input Cable Length: 100 meter Return Loss: <-20dB Power Consumption Power: 3.5W Positive Rail: 550mA Negative Rail: 10mA |
*Specifications are subject to change without notice
Ordering Information>>>
SMX6810N-B2
4-channel analog audio embedding module with 2 pairs of balanced AES outputs
SMX6810NS-B2
4-channel analog audio embedding module with 2 pairs of balanced AES outputs and audio tracking
SMX6810N-U2
4-channel analog audio embedding module with 2 pairs of unbalanced AES outputs
SMX6810NS-U2
4-channel analog audio embedding module with 2 pairs of unbalanced AES outputs and audio tracking
4-channel analog audio embedding module with 2 pairs of balanced AES outputs
SMX6810NS-B2
4-channel analog audio embedding module with 2 pairs of balanced AES outputs and audio tracking
SMX6810N-U2
4-channel analog audio embedding module with 2 pairs of unbalanced AES outputs
SMX6810NS-U2
4-channel analog audio embedding module with 2 pairs of unbalanced AES outputs and audio tracking